2005 Ski-Doo REV Series Shop Manual, Page 338Get this manual
Section 08 DRIVE SYSTEM Subsection 02 (DRIVE PULLEY)
Make sure to install blocks no8 at their original position and with their curved end toward governor cupSee following illustration
Accelerate the vehicle at low speed (maximum 30 kmh (20 MPH)) and apply the brake, repeat timesRetorque bolt to 95 Nm (70 lbfft)
WARNING
After 10 hours of operation the transmission system of the vehicle must be inspected to ensure the retaining screw is properly torqued
A33D1ZA