2005 Ski-Doo REV Series Shop Manual, Page 281Get this manual
Section 06 ENGINE MANAGEMENT (SDI) Subsection 03 (COMPONENT INSPECTION, REPLACEMENT AND ADJUSTMENT)
Check the continuity between pin on wiring harness TPS connector and pin 24 on wiring harness ECM connectorIf tests are good, replace the TPSIf voltage tests are not good, continue to check the resistance of the rest of the TPS circuit
Resistance Test
Reconnect the TPSDisconnect the connector from the ECM25 24
A32C9RB
THROTTLE BODY 1Throttle position sensor (TPS) 2Screws
R1503motr191A