2005 Ski-Doo REV Series Shop Manual, Page 180Get this manual
Section 03 ENGINES Subsection 10 (OIL INJECTION SYSTEM)
Liquid-cooled Models Remove: air box carburetor or throttle body screw no16Unplug all hoses connected to oil pump no4NOTE: Mark hose locations for installationDisconnect the oil pump cable
ASSEMBLY
CAUTION: Always bleed oil pump when the system has been openedNOTE: During installation, always check for spring clips no19 tightness
Injection Oil Reservoir
For installation, reverse the removal procedure
Oil Pump Gear
Fan-cooled Models Remove the oil pump from engineTo remove the gear retaining nut no17, first extract the needle roller no18 with pliers then lock gear in place using the gear holder (PN 420 876 695)
Injection Oil Level sensor
For installation, reverse the removal procedure
Injection Oil Filter
For installation, reverse the removal procedureNOTE: The filter must be installed with the arrow pointing toward the pump
Injection Oil Pump