2004 Skidoo ZX Series Service Manual, Page 530Get this manual
Section 12 BODYFRAME Subsection 01 (BODY)
CAUTION: Do not apply isopropyl alcohol or solvent directly on decalsUse only in well ventilated area
WARNING
Always ensure that the fuel, vent, primer, impulse, injection oil and rotary valve oil lines are properly fixed to their connectors, that they are not perforated or kinked and that they are properly routed away from any rotating, moving, heating or vibrating partsAlso check for leaksReplace if requiredNOTE: Refer to proper Parts Catalog to find suitable clip part numbers
WINDSHIELD INSTALLATION
Remove protective filmPosition the windshield on the hood then push it down until the tabs are fully inserted into the hood slotsLock the windshield tabs in position
Disassembly and Assembly
NOTE: For additional information (ex exploded view) refer to the correspondent Parts Catalog
PLASTIC MAINTENANCE AND REPAIR MAINTENANCE