2004 Skidoo ZX Series Service Manual, Page 529Get this manual
Section 12 BODYFRAME Subsection 01 (BODY)
INSTALLATION AND ADJUSTMENT HEADLAMP BEAM AIMING
Beam aiming is correct when center of high beam is 25 mm (1 in) below the headlamp horizontal center line, scribed on test surface, 381 cm (12 ft in) awayMeasure headlamp center distance from groundScribe line at this height on test surface (wall or screen)Light beam center should be 25 mm (1 in) below scribed line
BULB REPLACEMENT
Headlamp
If any headlight bulb is burnt, remove windshieldUnplug burnt bulb connectorRemove the rubber bootUnfasten bulb retainer ringDetach the bulb and replaceProperly reinstall parts
A30E05A
1Locking ring
A02E0AA