2004 Skidoo ZX Series Service Manual, Page 513Get this manual
Section 11 STEERINGFRONT SUSPENSION Subsection 01 (STEERING SYSTEM)
GENERAL
During assemblyinstallation, use the torque values and service products as in the exploded viewsClean threads before applying threadlockerRefer to SELF-LOCKING FASTENERS and LOCTITE APPLICATION at the beginning of this manual for complete procedure
CAMBER: specific inward or outward tilt angle of ski leg compared to vertical line when viewing the vehicle from front
Adjustments
Adjustments should be performed following this sequence: pivot arm centering camber angle ski alignmentQUICK CHECK Position handlebar no1 in straight ahead position as explained belowVerify pivot arm centering as explained belowIf it is within13 mm (23643364 in), proceed directly with camber adjustmentOtherwise, proceed with handlebar adjustment in PIVOT ARM CENTERING, then perform CAMBER ADJUSTMENT to then finally perform SKI ALIGNMENTPIVOT ARM CENTERING