2004 Skidoo ZX Series Service Manual, Page 485Get this manual
Section 10 REAR SUSPENSION Subsection 01 (SC-10 SUSPENSION)
17, Slider Shoe
Molding line is the wear limit indicator
Secure the shock body end in vise with its rod upwardA14F0BA
A03F3SA
TYPICAL 1Slider shoe 2Molding line (wear limit indicator)
Replace slider shoes when wear limit is reachedCAUTION: Slider shoes must always be replaced in pairs
18, Spring Support
CAUTION: To avoid track damage, spring supports must be mounted upward1