2004 Skidoo ZX Series Service Manual, Page 475Get this manual
Section 09 ELECTRICAL SYSTEM Subsection 06 (TESTING PROCEDURE)
360 ZX LC IGNITION AND ELECTRICAL SYSTEM TESTING
TEST TO BE PERFORMED
Running
WIRE COLOR
BK and BKYL BK and BKYL BKWH and BKGN BKWH and BKGN BK and negative battery terminal or body
MULTIMETER PROBE CONNECTION
11DA-3F 11DA-6F 11DB-3F 11DA-6F 11DA-4F 11DA-5F 11DA-4F 11DA-5F 00.0 00.0 00.0
RESISTANCE MULTIMETER SCALE 00.0 or auto
range or auto range or auto range or auto range
VOLTAGE VALUE (ohms)
MULTIMETER SCALE
VALUE (volt)
Engine cut-out switches must be in run positionEngine cut-out switches must be in stop positionTether cap must be in place
Engine stop switch
insulation Continuity in STOP position Insulation with
DESS switch
DESS removed Continuity with DESS in run position
Tether cap must be in place