2004 Skidoo ZX Series Service Manual, Page 430Get this manual
Section 08 TRANSMISSION Subsection 07 (GEARBOX)
Loosen chain tension, unscrew sliding gear retaining screw no31, then remove sliding gear no32
529 007 200
A32D0TA
A32D0LA
1Retaining screw 2Sliding gear 3Reverse axle
Remove 19-tooth reverse gear no18 then remove reverse axle no20Remove coupling shaft no33, 44-tooth sprocket no34, spacer no38 and chain no28First unscrew castellated nut no10, then remove 21 or 23-tooth sprocket no12 (as applicable)Force spring pins no16 out to disengage fork no17 from its axleInstall drive axle holder (PN 529 007 200) before removing gearbox housing
1Drive axle 2Suspension front arm upper axle