2004 Skidoo ZX Series Service Manual, Page 392Get this manual
Section 08 TRANSMISSION Subsection 02 (DRIVE PULLEY)
529 031 200 529 035 524
A32D2WA
A32D2UA
Use tool (PN 529 035 931) to press out old bushingNOTE: Make sure to use the tool (PN 529 035 931) as marked; to remove the bushing press using the side marked "OUT", as shown below in the picture
Clean sliding half bushing mounting surface with pulley flange cleaner (PN 413 711 809)To install new bushing, secure the spring compressor (PN 529 035 524) in vise and mount the sliding half ass'yInsert the bushing from inner side of sliding half ass'yMount tool (PN 529 035 931) with side marked "IN" to press in new bushing