2004 Skidoo ZX Series Service Manual, Page 206Get this manual
Section 04 ENGINES (2-STROKE) Subsection 09 (CARBURETOR AND THROTTLE CABLE) MODELS Legend SE 700 Legend SE Grand Touring 700 Legend Sport 700, Legend Grand Touring 700 Legend Sport 500 SS, Legend Sport Grand Touring 500 SS
THROTTLE SLIDE HEIGHT (drill bit size) 0.1 mm.004 in)
A32C72A
INSTALLATION
CAUTION: Never allow throttle slide(s) to snap shutInstall dual carburetor assembly making sure to align securing strap in its bracketCAUTION: Make sure dual carburetor assembly is properly inserted into carburetor sockets, hold it in place and tighten retaining clampsSecure heated carburetor inlet and outlet lines with clamps, tighten to 1.5 to 2.0 Nm (13 to 18 lbfin) and remove pincher on outlet lineAllow coolant to flow from coolant tank to carburetor before opening valveConnect all hoses to dual carburetor assembly
1Adjust PTO carburetor first 2Drill bit used as gauge to measure throttle height 3Idle speed screw