2004 Skidoo ZX Series Service Manual, Page 173Get this manual
Section 04 ENGINES (2-STROKE) Subsection 05 (OIL INJECTION SYSTEM)
To Bleed Oil Lines
Bleed main oil line (between reservoir and pump) by loosening the bleeder screw no14 until air has escaped from the lineAdd injection oil as requiredReinstall all partsBleed the small oil line between pump and engine by running engine at idle while holding the pump lever in fully open positionNOTE: Make hook out of mechanical wire to lift the lever
WARNING
A32D1NA
TYPICAL 1Adjusting cable 2Lock nut 3Adjusting screw
No ensure not operate carburetor throttle mechanismSecure the rear of the vehicle on stand
Refer to the following table to know the visible stretched distance of the cable MODELS 593, 593 HO SDI and 693 793 SDI VISIBLE STRETCHED DISTANCE 18 0.3 mm (0.71 0.12 in) 19.5 0.3 mm (0.77 0.12 in)