2004 Skidoo ZX Series Service Manual, Page 25Get this manual
INTRODUCTION
Preassembled Parts
Avoid touching metal with tip of flaskNOTE: If it is difficult to readjust, heat screw with soldering iron (232C (450F))
STRIPPED THREAD REPAIR
Stripped Threads
A00A3OA
1Apply here 2Do not apply
Clean bolts and nuts with solventAssemble componentsTighten nutsApply drops of proper strength Loctite on boltnut contact surfaces Avoid touching metal with tip of flaskNOTE: For preventive maintenance on existing equipment, retighten nuts and apply proper strength Loctite on boltnut contact surfaces
A00A3QA