2004 Skidoo Tundra Skandic Series Service Manual, Page 354Get this manual
Section 07 REAR SUSPENSION Subsection 02 (TORQUE REACTION SUSPENSION)
COMPONENT REMOVAL
Lift rear of vehicle and support it off the ground5, Rear Arm
Release track tensionRelease spring tensionUnfasten shock from rear armRemove screws retaining rear arm
SUSPENSION ASS'Y REMOVAL
Release track tensionNOTE: To prevent cross shaft from turning when unscrewing screws assembled with threadlocker, proceed as follows: Loosen one screw then retighten Remove the other screw Remove the first oneA05F0CA
11st hole 23 rd hole A11 Nm (97 lbfin)
9,10,12, Nut, Slotted Screw and Slider Shoe
To replace worn shoe, remove the front screw and stop nut, then slide the shoe rearward out of the runner1