2004 Skidoo Tundra Skandic Series Service Manual, Page 346Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
IGNITION SYSTEM TESTING (Tundra 240 W) PART TEST TO BE WIRE PERFORMED COLOR Running insulation Stop switch Continuity in STOP position Output Ignition generator coil Ground continuity Front Rear Secondary winding resistance with caps MPEM and high voltage coil Secondary winding resistance without caps Secondary winding voltage Spark plug cap Cap resistance BK BKYL BK BKYL RD BK BK engine WHYL BUYL WHYL BUYL Spark plug cap engine BK engine MULTIMETER PROBE CONNECTION 4-MOC-M 4-MOA-M 4-MOC-M 4-MOA-M 4-DB-1-F 4-DB-2-F 4-DB-2-F engine 4-DC-2-F 4-DC-1-F 4-DA-4-F 4-DA-3-F In spark plug cap and on the engine RESISTANCE VALUE (ohms) 0.L 00.000.5 4.56.5 MULTIMETER SCALE 00.0 00.0 00.0 VOLTAGE VALUE (volts) 7.015.0 MULTIMETER SCALE 00.0VAC NOTE No stop switch must be operationalOnly one stop switch must be operationalTest them one after the other The term "engine" refers to the engine metal parts connected to the magneto housing
Trigger coil