2004 Skidoo Tundra Skandic Series Service Manual, Page 345Get this manual

2004 Skidoo Tundra Skandic Series Service Manual, Page 345

Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
BUZZER TESTING
Using jumper wires, connect battery positive post to buzzer positive tabConnect battery negative post to buzzer negative tabCAUTION: To avoid buzzer damage, ensure that polarity is respected
MPEM CONNECTORS
To ease electrical readings on MPEM connectors, connector cap must be removedHold connector in hands then lift both tabs to remove connector cap

Back to 2004 Skidoo Tundra Skandic Series Service Manual