2004 Skidoo Tundra Skandic Series Service Manual, Page 335Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
Turn on programmer then enter passwordFrom main menu select no3VEHICLE INFO;
TrsVERIFY PGMR MPEM
A30E1XA
CHECK KEYS PROGRAM KEY VEHICLE INFO TA RT H
A30E2BA
And then following screen showing the actual calibration number in the MPEM
Vehicle information is transferred from MPEM to programmerC AT XXX XXX XXX MODIFY? YES NO
A30E2JA
TRANSFER PGMR MPEM
A30E1YA
NOTE: In fact the programmer takes copy of all vehicle parameters scribed in MPEMThis copy will be modified within the programmer then transferred to the MPEMSelect no4ENGINE PARAMETER
Check for proper calibration numberSee table belowSelect NO and press ENTERPress MENU twice; Trs then turn off programmer, unplug it from MPEMRemove 9-volt adaptorStop engine when using WITH ENGINE RUNNING procedureCALIBRATED CALIBRATION MPEM PN PROGRAM (hardware NUMBER and (software) software) 524 7879 524 7878 MPEM PN (hardware)