2004 Skidoo Tundra Skandic Series Service Manual, Page 317Get this manual
Section 06 ELECTRICAL Subsection 04 (BATTERY)
Connect BLACK negative cable LAST
WARNING
Battery BLACK negative cable must always be disconnected first and connected last
NOTE: Make sure not to cut wire strands while stripping the wireInstall the appropriate terminal on the wire according to the requirementRefer to appropriate parts catalog
WARNING
Never charge or boost battery while installed on vehicleApply silicone dielectric grease (PN 293 550 004) on battery posts and connectorsA32E2RA
INSTALLATION OF TERMINAL
Follow the instructions provided with the crimp plier (PN 529 035 730) to select the proper position of the toolNOTE: Different wires require different crimp plier settings, so make sure to follow the instruction supplied with the toolA03H1SA