2004 Skidoo Tundra Skandic Series Service Manual, Page 246Get this manual
Section 05 TRANSMISSION Subsection 04 (DRIVEN PULLEY)
ASSEMBLY
Assemble driven pulley components by reversing the disassembly procedure except for the following2,9, Slider Shoe
When replacing slider shoes, always install new set (3 shoes) to maintain equal pressure on the camInstall slider shoes as per following photoRed slider shoes are being used for reverse and black ones for forward
A05D0YA
1When loosening knob 2Hold stop nut with key
Remove tool and cam no3Remove spring no4 and sliding half no10