2004 Skidoo Tundra Skandic Series Service Manual, Page 222Get this manual
Section 05 TRANSMISSION Subsection 02 (DRIVE BELT)
A02D1UA
A01D2LA
INCORRECT
Adjustment
Before adjusting the belt height, ensure that goodcondition proper belt (refer to the APPLICATION CHART) is installedAdjust pulley distance and alignmentRefer to PULLEY DISTANCE AND ALIGNMENTModels Equipped with Formula VSA Type Driven Pulley Adjust drive belt height using Allen screws, as shownTo lower belt in driven pulley: turn Allen screws clockwiseTo raise belt in driven pulley: turn Allen screws counterclockwiseNOTE: Turn Allen screws 14 turn at time, then rotate driven pulley to allow drive belt to settle in pulleyCheck height, repeat as required