2004 Skidoo Tundra Skandic Series Service Manual, Page 203Get this manual
Section 04 ENGINE Subsection 10 (REWIND STARTER)
Callout
Lubricate pawl no8 with Molykote PG 54 (PN 420 899 763) then install over rope sheave
A32C6IA
FREE PORTION INSERTED INTO SHEAVE
Lubricate housing post with silicone compound greaseInstall sheaveTo adjust rope tension: Wind rope on sheave and place rope sheave into starter housing making sure that the sheave hub notch engages in the rewind spring hookRotate the sheave counterclockwise until rope end is accessible through rope exit holeThis will give 12 turn of preloadPull the rope out of the starter housing and temporarily make knot to hold it