2004 Skidoo Tundra Skandic Series Service Manual, Page 185Get this manual
Subsection 07
Section 04 ENGINE (OIL INJECTION SYSTEM)
WARNING
Wipe off any oil spillsOil is highly flammable
CAUTION: Always mount proper pump on engineENGINE TYPE 277 443 552 593 OIL PUMP IDENTIFICATION 132K E8 03 L7
OIL TYPE
All Models Use recommended injection oil as per vehicle Operator's Guide
OIL SYSTEM LEAK TEST
All Models The following test will indicate any leak from oil reservoir to the banjo fitting(s)Install on oil reservoir special cap of leak testing kit (PN 529 033 100)Install hose pinchers (PN 295 000 076) on outlet hoses1 2
NOTE: The following procedures can be done without removing the engine from chassis
CLEANING
Clean all metal components in non-ferrous metal cleaner
DISASSEMBLY
NOTE: Some oil pump components are not available as single parts