2004 Skidoo Tundra Skandic Series Service Manual, Page 154Get this manual
Section 04 ENGINE Subsection 04 (593 ENGINE TYPE)
Apply Loctite 243 (PN 293 800 060) on screws threadsInstall outlet socket and tighten screws to 12 Nm (106 Ibfin)Note position of longer screw
Check distance from blade stopper inner edge and distance from center of reed valve block
A06C36A A32C19A
1Longer screw
TYPICAL A14.750,0.75 mm (.5800,.030 in)