2004 Skidoo Tundra Skandic Series Service Manual, Page 111Get this manual
Section 04 ENGINE Subsection 02 (277 ENGINE TYPE)
REMOVAL FROM VEHICLE
Remove or disconnect the following then lift engine from vehicle: guard drive belt muffler carburetor oil injection pump cable oil injection inlet line impulse line electrical connectors hood retaining cable engine mount nuts
ENGINE SUPPORT AND MUFFLER DISASSEMBLY AND ASSEMBLY
Torque the manifold screws no16 to 25 Nm (18 lbfft)Torque the support screws no4 to 15 Nm (133 lbfin) and nuts no1 to 48 Nm (35 lbfft)Torque the engine support screws and nut no10 to 48 Nm (35 lbfft)Apply Loctite 243 (PN 293 800 060) on threads of screw no2Torque screws no2 retaining the engine support to engine crankcase to 21 Nm (15 lbfft)