2004 Skidoo Tundra Skandic Series Service Manual, Page 62Get this manual
Section 02 MAINTENANCE Subsection 03 (STORAGE)
Proceed as follows: Start the engine and allow it to run at idle speed until the engine reaches its operating temperature
WARNING
Ensure the track is free of all particles which could be thrown out while it is rotatingKeep hands, tools, feet and clothing clear of trackEnsure no one is standing in close proximity to the vehicleStop the engineModels with Primer To prevent fuel from draining, primer button should be pushed all the way inDisconnect the outlet primer hose from the primer valve (straight coupling)
Crank slowly or revolutions to lubricate cylindersReinstall the spark plugs and the outlet primer hose or air silencers
WARNING
This procedure must only be performed in well-ventilated areaDo not run engine during storage period
COUNTERSHAFT LUBRICATION
Driven pulley and brake disc must be floating on the countershaft for efficient operationLubricate with anti-seize lubricant (PN 293 800 070)CAUTION: Do not lubricate excessively as lubricant could contact and soil brake pads and or drive belt