2004 Ski-Doo Racing Handbook, Page 209Get this manual
SECTION 05DRIVE SYSTEM
TRACK TYPE APPLICATION
Refer to TECHNICAL DATAINSTALLATION
Reverse the removal procedureNOTE: When installing the track, respect rotation direction indicated by an arrow on track threadCheck sprockettrack alignment as described in DRIVE AXLE
GENERAL
This section gives guidelines for track removalSome components require more detailed disassembly proceduresIn these particular cases, refer to the pertaining section in this manual
ADJUSTMENT
Track Tension and Alignment
Track tension and alignment are inter-relatedDo not adjust one without checking the otherTrack tension procedure must be carried out prior to track alignment
INSPECTION
Visually inspect track for: cuts and abnormal wear broken rods broken or missing track cleatsIf track is damaged or rods are broken, replace trackFor damaged or missing cleats, replace by new ones, using cleat remover (PN 529 028 700)Use narrow-cleat installer (PN 529 008 500)