2004 Ski-Doo Racing Handbook, Page 46Get this manual
SECTION 03CHASSIS PREPARATION
7Remove the floating piston inside the remote reservoir
9Carefully remove and layout shims, washers, and piston from shaftPlay close attention to shim sequence and piston position
10Clean all shock components using Bombardier Sheave CleanerDO NOT MIX SHIMS AND WASHERS TOGETHER11Assemble valve shims, washers, and piston in proper order and place them back onto shock shaft12Torque the rod nut at 24-27 Nm (18-20 lbfft)A33F0ZA