2004 Ski-Doo Racing Handbook, Page 40Get this manual
SECTION 03CHASSIS PREPARATION
On all HPG take apart shocks from 1996 onThe floating piston is installed hollow side upA06F2WA
Damper nut torque 11-13 Nm (97-115 lbfin) use Loctite 271 Rebound shim pack Piston Compression shim pack O-ring visual inspection seal carrier assembly Damper rod
A27F0FC
Reinstall floating piston into damper body (ensure that Schrader valve core has been removed)Use molybdenum disulfide grease (example: molykote paste (PN 413 703 700) or silicone grease Dow Corning MS4 (PN 420 897 061) to ease O-ring past damper body threads with floating piston pilot (PN 529 026 600)CAUTION: Failure to install IFP correctly could result in shock damage1