2004 Ski-Doo REV Series Factory Service Manual, Page 342Get this manual
Section 09 STEERINGFRONT SUSPENSION Subsection 01 (STEERING SYSTEM) A33G0GA
1Torque to 25 Nm (18 lbfft) AEqual gap all around
A33G1CA
1Opening here 2Extension against stopper
Handlebar Position Adjustment
The handlebar position can be adjusted to suit driver's preferencesLoosen all bolts no4 retaining handlebar to steering column
CAUTION: Tighten the bolts equally in crisscross sequence and ensure there is an equal gap on each side of the clamps no2
WARNING
Avoid contact between the brake handle and the windshield by NOT adjusting the handlebar too highReadjust throttle lever housing no21 and switch housing accordingly to optimal angle so that you will not need to release your grip to operate levers