2004 Ski-Doo REV Series Factory Service Manual, Page 297Get this manual
Section 07 ELECTRICAL SYSTEM Subsection 05 (TESTING PROCEDURE)
NOTE: For the 480 models, use B.U.D.Ssoftware360 MODEL (ignition and electrical system testing) PART TEST TO BE PERFORMED
Running Engine stop switch insulation Continuity in STOP position Insulation with DESS switch DESS removed Continuity with DESS in run position
WIRE COLOR
BK and BKYL BK and BKYL BKWH and BKGN BKWH and BKGN BK and negative battery terminal or body
MULTIMETER RESISTANCE PROBE MULTIMETER VALUE CONNECTION SCALE (ohms)
11DA-3F 11DA-6F 11DB-3F 11DA-6F 11DA-4F 11DA-5F 11DA-4F 11DA-5F 00.0 00.0 00.0 00.0 or auto range or auto range or auto range or auto range 0.L 00.000.5
VOLTAGE MULTIMETER VALUE SCALE (volt)
Engine cut-out switches must be in run positionEngine cut-out switches must be in stop positionTether cap must be in place
Tether cap must be in place
Ground connection