2004 Ski-Doo REV Series Factory Service Manual, Page 272Get this manual

2004 Ski-Doo REV Series Factory Service Manual, Page 272

Section 07 ELECTRICAL SYSTEM Subsection 01 (IGNITION TIMING)
Select YES using the key Press ENTER1TIMING ADJUST 2ENGINE SERIAL AT N

A30E2GA

A30E23A

Press ENTER
Select timing correction factor corresponding to correction neededExample: Timing mark as verified with timing light at 3500 RPM was too early by 2The correction factor programmed is no4Select correction factor no5This will retard the timing by because the difference between correction factor no4 and no5 is(passing from to1)

PRESS ANY

Back to 2004 Ski-Doo REV Series Factory Service Manual