2004 Ski-Doo REV Series Factory Service Manual, Page 261Get this manual
Section 06 TRANSMISSION Subsection 05 (BRAKE)
A33D0WB
529 035 699
A33D0YA
1Screws
Install remover (PN 529 035 699) on countershaft for complete bearing no17 removal
1Washers use as mm (18 in) spacer 2Original retaining screw and shouldered washer 3Bearing against circlip
Ensure that countershaft is properly aligned, then tighten retaining screwsNOTE: misaligned countershaft will result in difficulty to center the bearing in its supportTorque castellated nut of upper sprocket to 45 to 75 Nm (33 to 55 lbfft)Close chaincase referring to CHAINCASE
COUNTERSHAFT
REMOVAL
A33D0XA