2004 Ski-Doo REV Series Factory Service Manual, Page 175Get this manual
Section 04 ENGINE Subsection 07 (CARBURETOR AND THROTTLE CABLE)
Start engine and allow it to warm then adjust idle speed to specifications by turning idle speed screw clockwise to increase engine speed or counterclockwise to decrease itRefer to TECHNICAL DATA for the specificationsCAUTION: Do not attempt to set the idle speed by using the pilot screwSevere engine damage can occur
TEMPERATURE3020 20 40 60 80 100 1202232 68 104 140 176 212 248
RESISTANCE (OHMS) 28 000 14 500 500 500 200 600 320 180 120
Some Models
Solenoid and MPEM
19 20 18 18
Static Test Unplug electric connector of solenoid no20 and connect it to 12 batteryThe solenoid must sound when it opensOtherwise, replace solenoidRepeat test several timesDynamic Test Air temperature sensor must be at 20 (68 F)For the test, operate the engine at the RPM specified in the following chartMODEL GSX 800 Limited MX 600 Renegade MX 800 AdrenalineRenegade Renegade XX Summit 600 AdrenalineX Summit 800 AdrenalineHMHM XHM XtremX TEST RPM