2004 Ski-Doo REV Series Factory Service Manual, Page 131Get this manual

2004 Ski-Doo REV Series Factory Service Manual, Page 131

Section 04 ENGINE Subsection 01 (593, 593 HO, 593 HO SDI AND 793 HO ENGINE TYPES)
Follow the same procedure for the inner bearing NOTE: In the case of damaged bearing or less clearance between crankshaft counterbalance and the bearing or on the MAG side bearing, use bearing separator such as Snap-On tool CJ 951 or SPXOTC tool 1124 to facilitate the removal
A32CB5A

A32CB4A

1Bearing separator

INSPECTION
Refer to LEAK TEST AND ENGINE DIMENSIONS MEASUREMENT

Back to 2004 Ski-Doo REV Series Factory Service Manual