2004 Ski-Doo Elite Factory Service Manual, Page 284Get this manual
Section 09 STEERINGFRONT SUSPENSION Subsection 01 (STEERING SYSTEM)
Loosen jam nuts of short tie rod no12Turn short tie accordinglyTighten jam nuts to 18 Nm (159 lbfin)
A06G05A
TYPICAL 1Angle finder
A34G09A
1Short tie rod
Using special tool (PN 529 021 600) mounted to the ski leg, position the angle finder on the tool as shown in the following illustrationAn alternate location for the angle finder if the special tool is not available is the outside of the ski leg housing
WARNING
Never lengthen this tie rod so that the external unengaged threaded portion of ball joint exceeds 20 mm (2532 in)After jam nut tightening, you should be able to rotate short tie rod by 10
CAUTION: Angle finder must sit square against swing armPositioning angle finder against weld bead or decal may result in false reading529 021 600
K-D Tools