2004 Ski-Doo Elite Factory Service Manual, Page 279Get this manual
Section 08 REAR SUSPENSION Subsection 03 (TRACK)
Alignment WARNING
Before checking track alignment, ensure that the tracks are free of all particles which could be thrown out while tracks are rotatingKeep hands, tools, feet and clothing clear of tracksEnsure no one is standing in close proximity to the vehicleNever rotate at high speedStart the engine and accelerate slightly so that tracks barely turnThis must be done in short period of time (1 to minutes)Check that each track is well centered; equal distance on both sides between edges of track guides and slider shoes1 2
A32F39A
1Top tool O-ring positioned at 7.3 kg (16 lb) 2Push on top portion of tool until it contacts the top O-ring 3Measured track deflection