2004 Ski-Doo Elite Factory Service Manual, Page 272Get this manual
Section 08 REAR SUSPENSION Subsection 01 (SC-10 III SUSPENSION)
Dowel Pin and Block Guide
Dowel pin no15 must exceed block guide no16 by to 2.3 mm (.079 to .091 in)At installation, insert dowel pin into pivot arm hole
A32F12A
Both blocks no17 are identified or (right or left), see second following photoAt installation, make sure to install proper block on proper sideAlso, note that protrusion must be positioned above stoppers
A32F14A