2004 Ski-Doo Elite Factory Service Manual, Page 242Get this manual
Section 06 TRANSMISSION Subsection 05 (BRAKE)
A34D11A
A34D0ZA
1Piston 2Pad spring
1Caliper 2Pad pins 3Brake pads
Install new brake pads
WARNING
Avoid getting fluid, oil or grease on brake padsContaminated brake pads can affect stopping capacitiesInstall new pad pins by pushing in the pads against pad spring to align pad slots in the pads and caliper bodyInstall caliper so that the disc is centered between padsRefer to CALIPERNOTE: Be careful not to damage pads and make sure pads are correctly inserted in their locationAfter the job is completed, firmly press the brake lever until both new pads are touching the brake discCheck for leaks and make sure the brakes operate normally before drivingThe pads must rest flat on the disk