2004 Ski-Doo Elite Factory Service Manual, Page 240Get this manual
Section 06 TRANSMISSION Subsection 05 (BRAKE)
A34G0FA
A34D0WA
Remove the steering cover by unscrewing the retaining screws
1Screws
Place container under Banjo bolt no3 then unscrew itDiscard the sealing rings no4
Installation
The installation is the reverse of removal procedurePay attention to the followingAlways use new sealing rings no4 during installationInstall clamp no5 with its arrow pointing at downwardsTighten to Nm (71 lbfin) lower screw before upper one