2004 Ski-Doo Elite Factory Service Manual, Page 161Get this manual
Section 04 ENGINE Subsection 09 (ENGINE BLOCK)
BALANCER SHAFT SEAT DIAMETER mm (in) NEW MINIMUM NEW MAXIMUM SERVICE LIMIT 31.984 mm (1.2592 in) 32.000 mm (1.2598 in) 31.960 mm (1.2583 in)
BALANCER SHAFT SEAT RADIAL CLEARANCE mm (in) SERVICE LIMIT 0.07 mm (.0028 in)
Installation
For installation, reverse the removal procedurePay attention to following detailCAUTION: Balancer shaft and crankshaft marks have to be alignedR1503motr20B
THRUST WASHER INSERT DIRECTION 1Thrust washer
CAUTION: Thrust washers have to be flush with the engine block sealing surface2