2004 Ski-Doo Elite Factory Service Manual, Page 160Get this manual
Section 04 ENGINE Subsection 09 (ENGINE BLOCK)
oil suction pump with oil separator ass'y (refer to SUCTION PUMP REMOVAL in LUBRICATION section) engine mounting brackets oil reservoir plug screws no1 with O-ring no2
R1503motr20A R1503motr05A
1Thrust washer
ENGINE UPSIDE DOWN 1Oil reservoir plug screw with O-ring
balancer shaft
engine block screws no3
Inspection
Check balancer shaft and replace if damagedIf the gear on the balancer shaft is damaged, replace balancer shaftCheck gear on the crankshaft at the same time and replace crankshaft if necessary (refer to CRANKSHAFT above)