2004 Ski-Doo Elite Factory Service Manual, Page 125Get this manual
Section 04 ENGINE Subsection 07 (LUBRICATION SYSTEM)
R1503motr121A
1O-ring 2Rubber ring gasket
If rubber rings are brittle, cracked or hard, replace themClean both contact surfaces of oil strainer coverCheck and clean the oil inlet and outlet area for dirt and other contaminationsR1503motr288A
1Screws M6 25 2Screws M6 85
Torque suction pump cover screws to 10 Nm (88 lbfin) as per sequence illustrated belowApply Loctite 243 on threadsR1503motr122A