2004 Ski-Doo Elite Factory Service Manual, Page 123Get this manual
Section 04 ENGINE Subsection 07 (LUBRICATION SYSTEM)
Inspection
Check oil filter cover O-ring no4 and oil filter screw O-ring, change if necessaryCheck and clean the oil filter inlet and outlet area for dirt and other contaminations
Torque oil filter screw to Nm (80 lbfin)
OIL STRAINERS
The oil strainers do not need to be cleaned at every oil changeClean them during other inspections, especially when the engine is disassembled
PTO Oil Strainer
Removal Remove: engine oil (refer to OIL CHANGE) PTO cover no5 (refer to PTO COVERMAGNETO section) oil strainer no6
R1503motr282A
TYPICAL 1Inlet bore from the oil pump to the oil filter 2Outlet bore to the engine oil providing system