2004 Ski-Doo Elite Factory Service Manual, Page 117Get this manual
Section 04 ENGINE Subsection 06 (COOLING SYSTEM)
Install the coolantoil pump shaft using the rotary seal installer (PN 529 035 823) on the opposite side to the rotary seal and the oil seal protector (PN 529 035 822) with press2 1
TECHNICAL DATA Type Coolant flow Temperature control Closed loop cooling system Flow build-up at coolant pump Thermostat and electric fan controlled by thermosensorRefer to ENGINE MANAGEMENT section Self-bleed type through coolant reservoir (hose at uppermost point of circuit) Turns on at 105C (220F) To be replaced for storage
System bleeding
F18E1AA
1Oil seal protector 2Coolantoil pump shaft