2004 Ski-Doo Elite Factory Service Manual, Page 112Get this manual
Section 04 ENGINE Subsection 06 (COOLING SYSTEM)
Lower front of vehicleReconnect hose on engine headThe remaining disconnected hose and muffler are to be reinstalled while performing the refilling processDispose coolant as per local regulations
COOLANT REPLACEMENT
Recommended Coolant
Use blend of 50 antifreeze with 50 waterPremixed antifreezewater is available (PN 293 600 038, 16 L)To prevent antifreeze deterioration, always use the same brandNever mix different brands unless cooling system is completely flushed and refilledDo not reinstall pressure capCAUTION: To prevent rust formation or freezing condition in cold areas, always replenish the system with 50 antifreeze and 50 waterPure antifreeze will freeze at higher temperature than the optimal waterantifreeze mixAlways use ethylene glycol antifreeze containing corrosion inhibitors specifically recommended for aluminum enginesSystem Capacity Refer to TECHNICAL DATACoolant Replacement Procedure
A34C1NA
1Watch air bubbles flowing here