2003 Ski-Doo ZX Series Factory Shop Manual, Page 295Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
360 ZX LC IGNITION AND ELECTRICAL SYSTEM TESTING PART RER switch (without battery) Start RER switch (All) TEST TO BE PERFORMED RER signal at MPEM Continuity from StartRER switch to MPEM Voltage supply from regulator WIRE COLOR RESISTANCE MULTIMETER PROBE MULTIMETER VALUE CONNECTION SCALE (ohms) 11-DA-7-F 11-DA-3-F 12-HG-8-M 11-DA-7-F 5-RR-87-F and negative battery terminal 6-FA-A-F 6-FA-B-F 2-MO-(1,2,3)-F 2-MO-(1,2,3)-F and engine 5-RC-85-F 5-RC-86-F 5-RC-87-F 5-RC-30-F 5-RC-85-F 5-RC-86-F 5-RC-87-F 5-RC-30-F 00.0 or auto range VOLTAGE MULTIMETER VALUE SCALE (volts) 00.0 Vdc 11 to 13 NOTE When RER button is activated when engine is running
BE and BK
BE and BE RDBU and negative battery terminal RD and RDWH YL and YL and GN YL and engine WHGN and BK RDWH and RDBR WHGN and BK RDBU and RDBR
Above battery voltage below 00.0 Vdc 15 volts 10 Scale 2-4 3.5 to 5.5 times 10.5 to 13.5 0.00 to 0.10 10.5 to 13.6 0.00 to 0.11
Engine 5000 RPM with fully charged batteryWith 30 fuse removed and Ammeter in seriesDo the test between and B, and and and using manual starterThe term engine refers to the metal parts connected to the magneto housingEngine Idling (1500 to 1800 RPM) Engine Idling (1500 to 1800 RPM) Engine Idling (1500 to 1800 RPM) Engine Idling (1500 to 1800 RPM)