2003 Ski-Doo ZX Series Factory Shop Manual, Page 294Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
360 ZX LC IGNITION AND ELECTRICAL SYSTEM TESTING PART TEST TO BE PERFORMED WIRE COLOR RESISTANCE MULTIMETER PROBE MULTIMETER VALUE CONNECTION SCALE (ohms) 11-DA-3-F 11-DA-6-F 11-DB-3-F 11-DA-6-F 11-DA-4-F 11-DA-5-F 11-DA-4-F 11-DA-5-F 00.0 or auto range 00.0 or auto range 00.0 or auto range 00.0 or auto range 00.0 or auto range 0.L 00.0 to 00.5 0.L 00.0 to 00.5 VOLTAGE MULTIMETER VALUE SCALE (volts) NOTE Engine stop switches must be in run positionEngine stop switches must be in stop positionTether cap must be removedTether cap must be in place
Engine stop switches
Running insulation BK and BKYL Continuity in stop BK and BKYL position Insulation with DESS removed Continuity with DESS in run position Ground connection BKWH and BKGN BKWH and BKGN BK and negative battery terminal or body
DESS switch
00.0 to 00.5
MPEM power (with battery) MPEM power (without battery) Trigger coil no1 Trigger coil no2 (RER only) MPEM output voltage