2003 Ski-Doo ZX Series Factory Shop Manual, Page 243Get this manual
Section 05 TRANSMISSION Subsection 06 (BRAKE)
10, Upper Clamp
Models with Hydraulic Brake Install upper clamp with its arrow pointing at front of vehicleTighten to Nm (71 lbfin) front screw before rear one2 1
Models with Hydraulic Brake Change brake fluid once yearBleed brake system as follows: Keep sufficient SRF (DOT 4) (PN 293 600 063) or GTLMA (DOT 4) (PN 293 600 062) brake fluid in reservoir at all timesCAUTION: Use only SRF (DOT 4) (PN 293 600 063) or GTLMA (DOT 4) (PN 293 600 062) brake fluidInstall hose on left side bleederRoute this hose to containerOpen bleederPump brake lever until no air escapes from hoseClose bleederProceed the same way with the right side bleederA03D3QB
TYPICAL 1Arrow on upper clamp pointing at front of vehicle 2Tighten front screw first
ADJUSTMENT