2003 Ski-Doo ZX Series Factory Shop Manual, Page 19Get this manual
INTRODUCTION
Preassembled Parts
3Avoid touching metal with tip of flaskNOTE: If it is difficult to readjust, heat screw with soldering iron (232C (450F))
STRIPPED THREAD REPAIR
Stripped Threads
A00A3OA
1Apply here 2Do not apply
1Clean bolts and nuts with solvent2Assemble components3Tighten nuts4Apply drops of proper strength Loctite on boltnut contact surfaces5Avoid touching metal with tip of flaskNOTE: For preventive maintenance on existing equipment, retighten nuts and apply proper strength Loctite on boltnut contact surfaces
A00A3QA