2003 Ski-Doo REV Series Factory Shop Manual, Page 270Get this manual
Section 08 STEERINGFRONT SUSPENSION Subsection 03 (SUSPENSION AND SKI SYSTEM)
Refer to STEERING SYSTEM section and remove tie rod from ski leg
Stabilizer Bar
Remove screws no21 from clamps no22
Upper Arm
Remove cotter pin no31 and unscrew ball joint nut no32Install ball joint remover (PN 529 035 827) and detach ball joint from ski leg
A33F27A
Using 4.8 mm (316 in) drill bit, drill rivet no24 outRemove cap.A33F2BA